Our website uses cookies to deliver the best customer experience. By continuing to browse or by clicking 'Accept', you agree to our cookie policy. Accept

How to Reduce Unbilled Time at Your Law Firm

18th November 2026
A blue clock beside a stack of law firm time entries and an invoice.

A matter can be ready to bill while its invoice is still weeks away. One time entry needs a clearer description. Another is on the wrong matter. A partner is holding a third until a client milestone. At month-end, all three show up as unbilled time, even though each needs a different decision.

To reduce unbilled time at your law firm, review recorded billable work every week. Start with its age and value, then give every blocked matter an owner, a next action, and a date. By the time your regular billing cycle begins, the team should already know which entries can go on a draft and which need attention.

Know where the work is waiting

Unbilled time is recorded billable time that has yet to make it onto an invoice. Review it by entry date so that recent work on a busy matter does not hide older entries waiting for a decision. Work that was never recorded needs a separate time-entry check. Compare active matters and expected work with submitted time before relying on any unbilled report.

  • Uninvoiced work needs an entry correction, a billing decision, or an invoice draft.
  • Draft or unsent invoices need a review, approval where your firm requires it, or a send date.
  • Sent invoices with a balance belong in accounts receivable and need the appropriate payment follow-up.
  • Non-billable time belongs in time and utilization reporting. On flat-fee matters, time can help the firm understand effort and profitability while the fee or milestone determines what gets invoiced.

Some reports use work in progress (WIP) to include both uninvoiced work and draft invoices. Lawcus uses that broader definition in its WIP reporting panel. For a weekly review, keep the two amounts separate so the same work does not appear twice in your action list. See how Lawcus reports on WIP.

Run a weekly WIP aging review

1. Build the list before the meeting

Have billing pull the list on the same day each week. Start with recorded, uninvoiced billable time, grouped by client and matter. Include the responsible attorney, oldest entry date, entry-level aging, hours, estimated billable value, and any known hold. Keep drafts awaiting review or sending on a separate list. For hourly work, use the applicable billing rates for an estimate. Confirm the final amount during invoice preparation.

Age each entry from the date the work was performed to the date of the review. Collect the values into consistent bands such as 0–30, 31–60, 61–90, and 91+ days. A matter can appear in more than one band. If its oldest entry is 47 days old but most of its work was recorded this week, use the 47-day entry to flag the matter and show the actual value in each band. That gives the reviewer a more accurate picture than aging the whole matter by its oldest entry.

2. Sort by billing date, age, and value

Look first at matters that are about to miss a billing cutoff, then at older work and high-value items. A few hours held for a closing matter may need attention ahead of a larger balance that is already scheduled for a client’s next billing cycle. Ask what decision will move each item forward and who can make it. When the reason is unclear, assign a person to check rather than carrying the same vague hold into next week.

3. End each review with an owner and a date

Give each row one next action. The person who performed the work can correct a narrative. The responsible attorney can resolve a scope, rate, or milestone question. Billing can prepare the draft once those decisions are recorded. For a valid hold, capture the reason, the date or event that will release it, and who will check it. Start the next meeting with actions whose dates have passed.

What a weekly review can look like

The example uses fictional matters and illustrative amounts. Each row shows only the entries under review in that age band. The values represent recorded work pending a billing decision.

Sample law firm WIP aging review
AgeMatterUnbilled valueStatus or blockerOwner and next action
0–30 daysCommercial lease$900Ready to draftBilling coordinator drafts by Thursday
31–60 daysEmployment advisory$1,800Two narratives need clarificationTimekeeper revises both by Wednesday
61–90 daysContract dispute$2,400Responsible attorney must confirm scopeMatter attorney records a billing decision by Friday
91+ daysBusiness acquisition$750Held until a billing milestoneMatter attorney confirms the milestone date at the next review

The four rows total $5,850, with $4,950 more than 30 days old. Billing can draft the $900 lease invoice this week. The other rows stay visible until their owners act. If the acquisition milestone slips, record the new date and retain the original entry age so the hold remains visible.

Prevent the same work from getting stuck again

Capture time while the work is fresh

Ask attorneys and paralegals to record work by the end of the day using the correct matter, service date, and billing classification. Set a consistent standard for narratives that gives a reviewer enough context to understand the work and follows the firm’s confidentiality practices and applicable client billing instructions. Where required, capture the client’s task or activity codes at entry. It is easier for the timekeeper to clarify one entry that day than reconstruct a week of work before invoicing.

Find the handoff that keeps breaking

If the same blocker appears across matters, change the workflow before asking people to work through a longer list. Repeated narrative corrections can point to unclear entry guidance. Repeated rate exceptions can point to setup that needs review. Drafts that routinely sit with one reviewer can point to a missing backup. Give each change an owner and check the next few billing cycles to see whether that reason appears less often.

Review closing matters before the file goes quiet

Make a billing check part of closing a matter. Review open time entries, pending drafts, and any documented hold separately. Confirm which work is ready to bill, which needs a decision from the responsible attorney, and when the last invoice should go out. A short check while the matter team is still assigned gives billing someone to ask about an entry.

Make the monthly cutoff someone’s responsibility

Work backward from your usual send date. For a Friday billing run, the coordinator could close the list on Tuesday, give timekeepers until Wednesday to fix entries, and route drafts to the designated reviewer on Thursday. Adjust the schedule to your firm’s approval rules and client deadlines. If part of a matter is ready and part is disputed, ask the responsible attorney whether the approved work can be billed separately under the client’s arrangement. Document that decision so the team knows which entries remain open.

When the cutoff passes, record the few items that missed it and why. Review those reasons at the next weekly meeting to see whether the problem was late time entry, missing information, or an invoice that had already been drafted and was waiting to go out. Each requires a different fix. Explore time and expense tracking in Lawcus.

Measure whether work is moving

  • Total uninvoiced billable value. Use the same date and scope each week. A larger total may simply reflect a busy week.
  • Share older than 30 days. Divide the value of uninvoiced time older than 30 days by total uninvoiced billable value. In the example, $4,950 divided by $5,850 is about 85%.
  • Time from work to invoice sent. Track the median days from service date to sent date for billed entries. If that number grows while uninvoiced work falls, look at the draft and approval queue.
  • Changes in older balances. Check how much was invoiced, adjusted, or held. A lower balance can come from different decisions, so record what moved it.

Compare the same measures across several billing cycles before changing targets. A firm that bills monthly, bills at milestones, or handles a mix of fee arrangements will see different patterns. Review each billing group on its own cadence so an expected hold does not hide a missed invoice cutoff.

How to review unbilled time in Lawcus

Use the Un-Invoiced Timesheet Summary Report to review logged time that is still waiting to be invoiced by client and matter. The WIP by Client report gives billing a client-level view when several matters contribute to the same balance.

In All Time Insights, use Firm Uninvoiced WIP Aging to see where work is accumulating. Top Matters Pending Invoicing shows unbilled hours, unbilled amount, and the age of the oldest unbilled entry. Open the matter from the list to investigate what is holding it. When work has moved to an invoice, use Billing Insights to see which invoices are still in the pipeline and which are awaiting payment.

Start your next review with the oldest matters and anything that could miss the next billing run. By the end of the meeting, each item should have a draft in progress, a documented hold, or a person and date for the next decision. Explore Lawcus Billing & Invoicing.